The Optimization Design of Micro-Cultivator Blade Used on Sloping Fields

The Optimization Design of Micro-Cultivator Blade Used on Sloping Fields

Jianfeng Lu* Keke Zhang Fugui Zhang

College of Mechanical Engineering, Guizhou University, Guiyang, 550025

Corresponding Author Email: 
cmejflu@gzu.edu.cn
Page: 
http://dx.doi.org/10.18280/mmep.020201
|
DOI: 
1-4
| | | | Citation

OPEN ACCESS

Abstract: 

This paper introduces the limitations of ordinary rotary cultivator blade. The structure design, static simulation analysis and optimization design of the rotary machete used on sloping fields were finished, and compared with and analyzed the simulation results of the ordinary rotary machete. At the same time, it made a checking calculation on the effective clearance angle of rotary machete used on sloping fields.

Keywords: 

micro-cultivator, blade, analysis, optimization

1. Introduction
2. Design of Rotary Blade Used on Sloping Fields
3. Comparative Analysis between Rotary Cultivator Used on Sloping Fields and Normal Rotary Cultivator
4. Conclusion
Acknowledgment
  References

[1] Nianchao Jiang, Cuiying Chen, Suface Modeling of Rotary Cultivator Based on the NURBS Theory, Transactions of the Chinese Society for Agricultural Machinery, 2002.3.3(5), pp.126-128.

[2] Ge Yun, The Stress Simulation and Reliable Design for the Main Working Parts of Self-propelled Rotary Cultivator ShiHeZi, ShiHeZi University, 2005.

[3] Xiaodong Zhang, Zhimei Du, Research Design of 1GW-6.8 Micro-Cultivator Used Indoors, Farm Machinery Using & Maintainance, 2006(6), pp. 12-14.

[4] Zhangxia, Zongshou Cai, Deguang Wu, Research on Designing the Whiling Blade Radius of Horticultural Cultivator, Journal of Yunnan Agricultural University, 2006.2.1(2), pp.250-255.

[5] Zhangxia, Zongshou Cai, Deguang Wu, Study on Blades of Self-propelling Cultivator, Journal of Yunnan Agricultural University, 2006.2.1(1), pp.103-106.

[6] Zongshou Cai, Zhangxia, Guizhong Lu, Optimization Design of Roller-Speed Ratio of Self-propelling Cultivator, Journal of Yunnan Agricultural University, 2006.2.1(5), pp.677-680.

[7] Wang Ze, 1Gd-40 Type DC Electric Multi-functional Micro-cultivator, The Equipment and Technology of Agriculture, 2007.3.3(2), sp-56.

[8] Gaofeng Yue, Xuying Yang, Diao Fei, Modular Design of the Micro-cultivator Based on SolidWorks, Journal of Agricultural Mechanization Research, 2009(2), pp.80-82.

[9] Zhirong Zheng, Analysis and Structure Optimization of Small Rotary Cultivator’s Broken Mechanism, NanNing, GuangXi University, 2010.