Three-dimensional simulation of the thermal performance of porous building brick impregnated with phase change material

Three-dimensional simulation of the thermal performance of porous building brick impregnated with phase change material

Nidhal Ben Khedher* Sassi Ben Nasrallah

Université de Monastir, École Nationale d'Ingénieurs de Monastir, Thermiques et Énergétiques LESTE, Avenue Ibn El Jazzar 5019, Monastir, Tunisia

Corresponding Author Email: 
nidhal.ben.khedher@gmail.com
Page: 
163-169
|
DOI: 
https://doi.org/10.18280/ijht.320123
Received: 
N/A
| |
Accepted: 
N/A
| | Citation

OPEN ACCESS

Abstract: 

Integration of phase change materials (PCMs) into building fabrics is considered to be one of the potential and effective ways of minimizing energy consumption and CO2 emissions in the building sector. The application of such materials for building construction makes it possible to improve thermal comfort in summer and reduce heating energy consumption in winter. The choice of a PCM depends deeply on the building structure, on the weather and on building use: numerical modelling is indispensable. The thermal performances of a brick impregnated with PCM (PCM-brick) have been numerically investigated in a full scale test room. The PCM-brick is assumed to be a porous medium saturated with PCM. Three-dimensional model is developed to asses the thermal behaviour of this porous medium (PCM-brick). The volume averaged energy equation with phase change in the porous medium is discretized by the control volume finite element method (CVFEM). The resulted algebraic equation was solved by the Bi-Conjugate Gradient Stabilized iterative solver. A series of numerical tests are then undertaken to assess the effects of PCM type, matrix porosity and brick thickness on the indoor air temperature for three summer days.

1. Introduction
2. Modelling
3. Numerical Treatment
4. Results and Discussions
5. Conclusion
6. Nomenclature
  References

1. Feldman, D., Banu, D., Hawes, D.W. Development and application of organic phase change mixtures in thermal storage gypsum wallboard. (1995). Solar Energy Materials and Solar Cells, 36 (2), pp. 147-157.

2. Hasnain, S.M. (1997). Review on Sustainable Thermal Energy Storage Technologies, Part I: Heat Storage Materials and Techniques, Energy Research, 39, pp. 1127-1138.

3. Zalba, B., Marín, J.M., Cabeza, L.F., Mehling, H. Review on thermal energy storage with phase change: Materials, heat transfer analysis and applications. (2003). Applied Thermal Engineering, 23 (3), pp. 251-283.

4. Peippo, K., Kauranen, P., Lund, P.D. A multicomponent PCM wall optimized for passive solar heating. (1991). Energy and Buildings, 17 (4), pp. 259-270.

5. Gu, Z., Liu, H., Li, Y. Thermal energy recovery of air conditioning system - Heat recovery system calculation and phase change materials development. (2004). Applied Thermal Engineering, 24 (17-18), pp. 2511-2526.

6. Kaasinen, H. The absorption of phase change substances into commonly used building materials. (1992). Solar Energy Materials and Solar Cells, 27 (2), pp. 173-179.

7. Athienitis, A.K., Liu, C., Hawes, D., Banu, D., Feldman, D. Investigation of the thermal performance of a passive solar test-room with wall latent heat storage. (1997). Building and Environment, 32 (5), pp. 405-410.

8. Stovall, T.K., Tomlinson, J.J. What are the potential benefits of including latent storage in common wallboard? (1995). Journal of Solar Energy Engineering, Transactions of the ASME, 117 (4), pp. 318-325.

9. Ahmad, M., Bontemps, A., Sallée, H., Quenard, D. Thermal testing and numerical simulation of a prototype cell using light wallboards coupling vacuum isolation panels and phase change material. (2006). Energy and Buildings, 38 (6), pp. 673-681.

10. Nomura, T., Okinaka, N., Akiyama, T.Impregnation of porous material with phase change material for thermal energy storage. (2009). Materials Chemistry and Physics, 115 (2-3), pp. 846-850.

11. Alexiades, V., Solomon, A.D. (1993). Mathematical Modeling of Melting and Freezing Processes. Hemisphere Publishing Corporation

12. Trelles, J.P., Dufly, J.J. Numerical simulation of porous latent heat thermal energy storage for thermoelectric cooling. (2003). Applied Thermal Engineering, 23 (13), pp. 1647-1664.

13. Voller, V.R.Fast implicit finite-difference method for the analysis of phase change problems. (1990). Numerical Heat Transfer, Part B: Fundamentals, 17 (2), pp. 155-169.

14. Saabas, H.J., Baliga, B.R.Co-located equal-order control-volume finite-element method for multidimensional, incompressible. fluid flow - part I: Formulation. (1994). Numerical Heat Transfer, Part B: Fundamentals, 26 (4), pp. 381-407.

15. Khedher, N.B., Nasrallah, S.B. Unstructured control volume finite element method for coupled heat and mass transfer during the drying of porous medium having complex 2D-geometry. (2010). International Journal of Heat and Technology, 28 (2), pp. 79-86.

16. Grissa, H., Askri, F., Ben Salah, M., Ben Nasrallah, S.COupled conduction-radiation heat transfer problem for three-dimensional complex geometry. (2011). International Journal of Heat and Technology, 29 (2), pp. 33-40.

17. Saad, Y. (1996). Iterative Methods for Sparse Linear Systems. PWS Publishing Company.