An Approach to Investigate the Characteristics of High Speed Turbo Machines

An Approach to Investigate the Characteristics of High Speed Turbo Machines

P.K. SarmaRajesh Ghosh Y.V.V.S.N. Murthy Reddipalli Srihari Kedarnath Chada C.P. Ramnarayanan 

Gitam University, Visakhapatnam, 530045

Naval Science and Technological Laboratories, Visakhapatnam, India

GasTurbine Research Establishment, Bengaluru, India

Page: 
3-8
|
DOI: 
https://doi.org/10.18280/ijht.310201
Received: 
N/A
| |
Accepted: 
N/A
| | Citation

OPEN ACCESS

Abstract: 

The article proposes a method to investigate some of the essential characteristics of high speed rotating machinery. The underlying principle of power versus speed dependence of a rotating machine is defined by a second order differential equation with dependent and independent variables respectively as power and speed. The solution of such an equation together with the dynamic relation of flow of the medium would enable further to generate the essential characteristics specific power of the compressible medium of the turbo machine under consideration.

1. Introduction
2. Estimation of Frictional Power
3. Mechanical Efficiency
4. Working Medium
5. Conclusions
  References

[1] C. B. Meher-Homli, Mustapha A chaker, Hatim M Motiwala, Gas turine performance deterioration, Proceedings of the 30th turbomachinery Symposium.

[2] A. Lazzaretto and A. Toffolo, Analytical and Neural Network Models for Gas Turbine Design and Off-Design Simulation, Int.J. Applied Thermodynamics, vol.4, (No.4), pp.173-182, December-2001

[3] M. Moran and H. Shapiro, Fundamentals of Engineering Thermodynamics, John Wiley and Sons Ltd, New York, NY. 1998.

[4] E. L. Keating, Applied Combustion, M.Dekker, Inc. , New York,1993.

[5] Ulrich Grigull, Properties of water and steam in SI units, Springer-Verlag, Berlin Heidelberg, New York.

[6] R. Kurz, R. K. Marechale, E. J. Fowler, Min Ji, M. J. Cave, Operation Of Centrifugal Compressors In Choke Conditions, Proceedings of the Fortieth Turbomachinery Symposium September 12-15, 2011, Houston, Texas.