Research on Knowledge Base System Based On UML and JQueryEasyUI

Research on Knowledge Base System Based On UML and JQueryEasyUI

Tichun Wang Xinxin Hu  Shisheng Zhong  Yongjian Zhang 

College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China

School of Mechantronics Engineering, Harbin Institute of Technology, Harbin 150001, China

Corresponding Author Email: 
wangtichun2010@nuaa.edu.cn
Page: 
47-51
|
DOI: 
10.18280/rces.030205
Received: 
|
Accepted: 
|
Published: 
30 June 2016
| Citation

OPEN ACCESS

Abstract: 

Aiming at the problem of complex bearing information in a company, the process of developing a bearing information knowledge base system (KBS) was studied, the modeling technology of UML and the technical framework of jQueryEasyUI were analyzed theoretically, then a method about using UML modeling to plan the development mode and system architecture of software product was proposed, finally, the friendly available KBS modules could be developed by using jQueryEasyUI. System framework, bearing module and finite element simulation curve module in the bearing information KBS were treated as examples, the process of KBS by using UML and jQueryEasyUI to assist in software development was introduced. The results indicate that the modeling technology of UML for determining the software requirements and defining the information architecture in modules of bearing information KBS was efficiently, the reuse of jQueryEasyUI could improve the speed of bearing information KBS development with modularity, based on meeting the goal of KBS, the efficiency could be improved.

Keywords: 

Bearing information, KBS, UML, jQueryEasyUI, Software development

1. Introduction
2. The Key Technologies of UML and JQUERYEASYUI
3. The Design of Bearing Information KBS
4. Application in Bearing Information KBS
5. Conclusions
Acknowledgement
  References

[1] Yang Y., Zou S. L. and Cai Y., “Principle of knowledge base system,” Journal of East China Geological Institute, 2001.

[2] Liu Wenhui, “Talk about the process of software development,” Decision & Information, vol. 12, pp. 339-339, 2015.

[3] Wu Jun, Jin Chengqian, Tang Qing and Qian Binyuan. “Construction of the knowledge base system for man-machine interface design and evaluation of agric,” Chinese Agricul Tural Mechanization, vol. 36, no. 3, pp. 247-250, 2015. 

[4] Zhou Jie, Li Bicheng, Lin Chen, et al. “Research on the system design of solid knowledge base based on network resources -- a case study of government related entities,” Information Science, vol. 34, no. 1, pp. 87-91, 2016.

[5] Robin Andersson, A. V. Ski and Jan Komorowski. “A rough knowledge base system,” Science LNC, Springer Berlin, pp. 48-58, 2014.

[6] Corporatoin S., “System for linking medical terms for a medical knowledge base,” 2014.

[7] Booch G., Rumbaugh J. and Jacobson I., The unified Modeling Language User Guide, China Machine Press, 2006.

[8] MA Framingham, “Object Management Group,” vol. 19, no. 4, pp. 2109 – 2110, 1997.

[9] Xue Junxiao, UML System Analysis and Design, China Machine Press, 2014.

[10] Liu Haishu. “Discussion on the application of jQuery,” Digital Technology and Application, vol. 2, pp. 50-50, 2010. 

[11] Luo Wenliang, “Analysis of the interaction mechanism between ASP.NET and jQueryEasyUI,” Consumer Electronics Magazine, vol. 8, pp. 169-169, 2013.

[12] Fan Sheng, “Structure comparison of C/S and B/S and the way of access to Web database,” Information Science, vol. 19, no. 4, pp. 443-445, 2010.

[13] Sam-Bodden B. and Judd C., “Object-relational mapping,” Software Development, vol. 4, no. 10, pp. 47-50, 2010.