Home Journals JNMES Synthesis of Na2MnFe(CN)6 and its Application as Cathode Material for Aqueous Rechargeable Sodium-ion Battery

JOURNAL METRICS

Impact Factor (JCR) 2022: 0.9 ℹImpact Factor (JCR):

The JCR provides quantitative tools for ranking, evaluating, categorizing, and comparing journals. The impact factor is one of these; it is a measure of the frequency with which the “average article” in a journal has been cited in a particular year or period. The annual JCR impact factor is a ratio between citations and recent citable items published. Thus, the impact factor of a journal is calculated by dividing the number of current year citations to the source items published in that journal during the previous two years.

5-Year Impact Factor: 0.7 ℹ5-Year Impact Factor:

A 5-Year Impact Factor shows the long-term citation trend for a journal. This is calculated differently from the Journal Impact Factor, so it is not simply an average of the Impact Factors in the time period. The Impact Factor itself is based only on Web of Science Core Collection citation data from the last three years and thus reflects only recent impact. The Journal Impact Factor is the average number of times articles from the journal published in the past two years have been cited in the Journal Citation Reports year.

CiteScore 2022: 1.9 ℹCiteScore:

CiteScore is the number of citations received by a journal in one year to documents published in the three previous years, divided by the number of documents indexed in Scopus published in those same three years.

SCImago Journal Rank (SJR) 2022: 0.21 ℹSCImago Journal Rank (SJR):

The SJR is a size-independent prestige indicator that ranks journals by their 'average prestige per article'. It is based on the idea that 'all citations are not created equal'. SJR is a measure of scientific influence of journals that accounts for both the number of citations received by a journal and the importance or prestige of the journals where such citations come from It measures the scientific influence of the average article in a journal, it expresses how central to the global scientific discussion an average article of the journal is.

Source Normalized Impact per Paper (SNIP) 2022: 0.296 ℹSource Normalized Impact per Paper (SNIP):

SNIP measures a source’s contextual citation impact by weighting citations based on the total number of citations in a subject field. It helps you make a direct comparison of sources in different subject fields. SNIP takes into account characteristics of the source's subject field, which is the set of documents citing that source.

240x200fu_ben_.jpg

123.png

Synthesis of Na2MnFe(CN)6 and its Application as Cathode Material for Aqueous Rechargeable Sodium-ion Battery

Synthesis of Na₂MnFe(CN)₆ and its Application as Cathode Material for Aqueous Rechargeable Sodium-ion Battery

Jianzhi Sun* | Yan Dong | Chunyan Kong

College of Chemistry and Chemical Engineering, Dezhou University, Shandong Dezhou, P.R. China 253023

Corresponding Author Email:

jianzhisun@163.com

Received:

21 April 2016

| |

Accepted:

20 July 2016

| | Citation

v19n03a01_p117-119.pdf

OPEN ACCESS

Abstract:

Prussian Blue type Na₂MnFe(CN)₆ was prepared by direct precipitation method and a subsequent drying procedure as a cath-ode material for aqueous rechargeable sodium-ion batteries. XRD patterns showed that Na₂MnFe(CN)₆has a typical Prussian Blue struc-ture with space group Fm3m. Na₂MnFe(CN)₆presents good electrochemical behaviors at 10 mAg^-1 discharge current density with specific capacity 73.1 mAhg^-1 after 30 cycles. The results show that Na2MnFe(CN)6 could be a potential cathode material for aqueous Sodium-ion battery.

Keywords:

aqueous sodium-ion battery, cathode Material, Na2MnFe(CN)6, prussian blue analogue

1. Introduction

2. Experimental

3. Results and Discussion

4. Conclusion

5. Acknowledgments

References

[1] Y Naoaki，K Kei，D Mouad，K Shinichi, Chemical Reviews, 114(23), 11636 (2014).

[2] C. Kim, K. Lee, I. Kim, J. Park, G. Cho, K. Kim, J. Ahn, H. Ahn. Journal of Power Sources, 317, 153 (2016).

[3] J. Z. Sun, Z. Jiang. J. New Mat. Electrochem. Systems, 17, 9 (2014).

[4] Z. L. Chu, C.B. Yue. Solid State Ionics, 287, 36 (2016).

[5] H. B. Li, F. Shen, W. Luo, J. Q. Dai, X. G. Han, Y. N. Chen, Y. G. Yao, H. L. Zhu, K. Fu, E. Hitz, L. B. Hu. ACS Applied Materials & Interfaces, 8, 2204 (2016).

[6] D. Sun, Y. F. Jiang, H. Y. Wang, Y. Yao, G. Q. Xu, K. J. He, S. Q. Liu, Y. G. Tang, Y. N. Liu, X. B. Huang. Scientific Reports, 5, 10733 (2015).

[7] H. Wang, P. F. Hu, J. Yang, G. M. Gong, L. Guo, X. D. Chen, Advanced materials, 27, 2348 (2015).

[8] M. Xie, M. H. Xu, Y. X. Huang, R. J. Chen, X. X. Zhang, L. Li, F. Wu. Electrochemistry Communications, 59, 91 (2015).

[9] X. Y. Wu, Y.L. Cao, X. P. Ai, J. F. Qian, H. X. Yang. Electrochemistry Communications, 31, 145 (2013).

[10]Y. H. LU，L. WANG，J. G. CHENG，J. B. Goodenough. Chemical Communications, 52, 6544 (2012).

IJHT
MMEP
ACSM
EJEE
ISI
I2M
JESA
RCMA
RIA
TS
IJSDP
IJSSE
IJDNE
JNMES
IJES
EESRJ
RCES
AMA_A
AMA_B
AMA_C
AMA_D
MMC_A
MMC_B
MMC_C
MMC_D

Username
Password
Remember me

Search form

Synthesis of Na2MnFe(CN)6 and its Application as Cathode Material for Aqueous Rechargeable Sodium-ion Battery