Study on the Interface and Performance of Ti-Al Laminated Composite Electrode Materials

Study on the Interface and Performance of Ti-Al Laminated Composite Electrode Materials

Zhaohui Han Peixian ZhuYuzhong Guo Shenggang Zhou 

Kunming University of Science and Technology, College of Materials Science and Engineering, Kunming 650093, China

Kunming University of Science and Technology, College of Materials Science and Engineering, Kunming 650093, China

Corresponding Author Email: 
zhu_pei_xian@163.com
Page: 
159-164
|
DOI: 
https://doi.org/10.14447/jnmes.v18i3.363
Received: 
18 June 2015
|
Accepted: 
3 July 2015
|
Published: 
28 August 2015
| Citation
Abstract: 

The Ti-Al laminated composite materials had been prepared by hot press diffusion bonding in this article, then, treated for different thickness of Al layer in the same process conditions. The change of composite material structure is influences on the performance of Ti-Al were investigated by SEM, HRTEM, electrochemical workstation and so on. The results show that it has the characteristics of the composite's interface and the completion of "metallurgy like" integration between Ti and Al, the chang of matrix structure design of traditional Ti electrode is good for enhance the electrochemical performance of electrode, it is completely changed how the current transfer on the Ti-Al laminated composite materials, so that current distribution of electrode is uniform.

Keywords: 

hot press diffusion bonding, Ti-Al laminated composite materials, anode materials, current transfer mode, electrochemical performance, surface potential distribution

1. Introduction
2. Experimental Procedure
3. Results and Discussion
4. Conclusions
Acknowledgements

The Project was supported by the National High Technology Research and Development Program of China (Grant No. 2009AA03Z512)

  References

[1] M. Poliakoff, J.M. Fitzpatrick, T.R. Farren, P.T. Anastas, Sci-ence, 297, 807 (2002).

[2] He Enze, Fu Jun, Chem. Ind. Eng. Prog., 14(3), 5 (1999).

[3] J.C. Warner, A.S. Cannon, K.M. Dye, Impact Assessment Re-view, 24, 775 (2004).

[4] M.M. Kirchhoff, Resour. Conserv. Recy., 44, 237 (2005).

[5] Ma Fukang, Rare Metal Handbook, Metallurgy Industry Press, Beijing, 2008.

[6] Electroplating Manual Compilation Group, Electroplating Handbook, National Defence Industrial Press, Beijing, 1980.

[7] Chen Jiayong. Hydrometallurgy Handbook, Metallurgy Indus-try Press, Beijing, 2005.

[8] Zhang Zhaoxian, Engineering of titanium electrode, Metallurgy Industry Press, Beijing, 2000.

[9] S. Trasatti, Electrochimica Acta, 45, 2377 (2000).

[10] Tao Zichun, Luo Qifu, Pan Jianyue, Journal of Materials Sci-ence and Engineering, 21, 138 (2003).

[11] Shi Yanhua, Meng Huimin, Sun Dongbai, Ni Yongle, Chen Dong, Acta Phys.-Chim., Sin., 23, 1553 (2007).

[12] Hu Jiming, Meng Huimin, Zhang Jianqing, Cao Chunan, Acta Phys.-Chim. Sin., 18, 14 (2002).

[13] Leonardo M.Da Silva,Karla C.Femandes,Luiz A.De Faria, Electrochemica Acta, 49, 4893 (2004).

[14] Mario H. P. Santana,Luiz A. De Faria, Electrochemica Acta, 51, 3578 (2006).

[15] Han Zhaohui, Zhu Peixian, Ma Huiyu, Acta Materiae Com-positae Sinica, 29, 129 (2012).

[16] Yang Xiuqin, Zhu Peixian, Huang Wenfang, Zhou Shenggang, Transactions of Materials and Heat Treatment, 31, 15 (2010).

[17] Han Zhaohui, Zhou Shenggang, Zhu Peixian, Guo Jiaxin, Acta Materiae Compositae Sinica, 21, 1088 (2014).

[18] Pan Jinsheng, Tong Jianmin, Tian Minbo, Foundation of mate-rial science, Tsinghua University press, Beijing, 2007.

[19] Gu Chenqing, Foundation of Materials Engineering, Machinery Industry Press, Beijing, 2003.

[20] Wang Yuqing, Electroplating and Pollution Control, 26, 36 (2003).

[21] Guo Hetong, Qin Qixian. Electrochemical tutorial, Tianjin University press, Tianjin, 2000.

[22] Zha Quanxing, Introduction of kinetics of electrode process, Science Press, Beijing, 2007.

[23] Zhang Zhaoxian, Zhao Guopeng, Luo Xiaojun, Introduction of Titanium Electrodes, Metallurgical Industry Press, Beijing, 2008.