1-10 |
|
Ahmed L. Boukhalkhal, Yahia Lasbet , Mohammed Makhlouf, Khaled Loubar |
|
11-18 |
|
Manoj K. Triveni, Rajsekhar Panua |
|
Flat-rheology oil-based drilling fluid for deepwater drilling |
19-24 |
Xin Zhao, Zhengsong Qiu, Jiangen Xu, Chao Zhao, Jian Gao |
|
25-31 |
|
Govind R. Rajput, Vishwambhar S. Patil, J.S.V.R. Krishna Prasad |
|
32-36 |
|
Zhihui Wen, Yong Liu, Xiaotian Liu, Bochen Liang |
|
37-52 |
|
Jitendra K. Singh, Pratima Rohidas, Naveen Joshi, Shaikh G. Begum |
|
53-58 |
|
Yue Wang, Daikuan Huang |
|
59-66 |
|
Ebrahim Zeiny, Mousa Farhadi, Kurosh Sedighi |
|
67-74 |
|
Jiansong Wu, Ming Fu, Xing Tong, Yueping Qin |
|
Numerical simulation of fish meat freezing with considering temperature-dependent thermal properties |
75-81 |
Farzad Sepahvandi, Hamid M. Heravi, Seyed R. Saleh |
|
82-90 |
|
Ahmed M. Rashad |
|
91-96 |
|
Weizheng Cui, Xiantang Zhang, Zexi Li, Hui Li, Yan Liu |
|
97-102 |
|
Ganesan Mahadeven, Subramanian Sendilvelan |
|
Modified Mukherjee-Brill prediction model of pressure gradient for multiphase flow in wells |
103-108 |
Yu Lei, Ruiquan Liao, Mengxia Li, Yong Li, Wei Luo |
|
Natural convection and entropy production in a cubic cavity heated via pin-fins heat sinks |
109-115 |
Abdullah A.A.A. Al-Rashed, Lioua Kolsi, Hakan F. Oztop, Nidal Abu-Hamdeh, Mohamed Naceur Borjini |
|
116-122 |
|
Ahmad H. Sakhrieh, Ahmad N. Al-Hares, Fawaz A. Faqes, Adel S. Al Baqain, Nizar H. Alrafie |
|
123-129 |
|
Xu Li, Chao Tang, Qian Wang, Xiaoping Li, Jian Hao |
|
130-138 |
|
Furio Cascetta, Luca Cirillo, Alessandro Della Corte, Sergio Nardini |
|
Analysis on the effects of the shapes of flexible fluid-filled containers on their impact response |
139-146 |
Yuantao Zhang, Weiming Zhang, Jie Guo, Jianyong Guo, Rui Guo |
|
A hybrid method of debris flow velocity estimation based on empirical equation |
147-152 |
Shuwen Tian, Changming Wang, Zhimin Zhang |
|
Flow and thermal characteristics of jet impingement: comprehensive review |
153-166 |
Anuj K. Shukla, Anupam Dewan |
|
Research on the effect of rotation and curvature on turbulence model and their application |
167-176 |
Xin Jiang, Lei Zhang |
|
Influence of thermal-mechanical coupling effect on vibration of double-drive feed system |
177-182 |
Jun Huang, Juntang Yuan, Zhenhua Wang |
|
Contribution to study the effect of exhaust gas recirculation EGR on HCCI combustion mode |
183-190 |
Slimane Benhorma, Mokhtar Aouissi, C. Mansour, A. Bounif |
|
Water profiles in vertical slot fishways without central baffle |
191-195 |
Guangning Li, Shuangke Sun, Haitao Liu, Tiegang Zheng, Chao Zhang |
|
Radiation effects on Williamson nanofluid flow over a heated surface with magnetohydrodynamics |
196-204 |
Fazle Mabood, Sheikh M. Ibrahim, Giulio Lorenzini, Enrico Lorenzin |
|
Simulation of corrugated plate heat exchanger for heat and flow analysis |
205-210 |
Muhammad Asif, H. Aftab, H.A. Syed, M.A. Ali, P.M. Muizz |
|
211-218 |
|
Gianfranco Caruso, Matteo Nobili |
|
219-224 |
|
Chao Sun, Qianying Li, Wei Lu, Xintong Liu, Bin Liu, Xiangxi Pei |
|
A comparison between electrocaloric and magnetocaloric materials for solid state refrigeration |
225-234 |
Ciro Aprea , Adriana Greco, Angelo Maiorino , Claudia Masselli |
|